Intel GA-N680SLI-DQ6 user manual English, Save And Exit Setup

To check more detailed information about the array, use the TAB key while in the Main Menu block to move the selection bar to the RAID Disk Drive List block. Select the array and press ENTER.

A small window displaying the array information will appear in the center of the screen (Figure 11).

GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.59

English

[ Main Menu ]	[ Hard Disk Drive List ]
Create RAID Disk Drive	Mode Name
Delete RAID Disk Drive	HDD0: ST3120026AS
Revert HDD to Non-RAID	HDD1: ST3120026AS
Solve Mirror Conflict	[ RAID Information ]
Rebuild Mirror Drive
	Name: JRAID
Save And Exit Setup
Exit Without Saving	Level: 0-Stripe
	Block: 128KB
[ RAID Disk Drive List ]	Capacity: 240GB
Model Name	RAID LevelMembers: HDD 01Capacity
RDD0: GRAID	0-Stripe Status: Normal 240 GB

Available	Type/Status
120 GB	RAID Inside
120 GB	RAID Inside

Status Members(HDDx)

Normal 01

[ TAB]-Switch Window [ ]-Select RAID [ENTER]-Detail [ESC]-Exit

Figure 11

After configuring the RAID array, select the Save And Exit Setup item in the main screen to save your settings if you wish to exit the RAID BIOS utility, then press Y (Figure 12).

GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS V1.06.59

[ Main Menu ]

Create RAID Disk Drive

Delete RAID Disk Drive

Revert HDD to Non-RAID

Solve Mirror Conflict

Rebuild Mirror Drive

Save And Exit Setup

Exit Without Saving

[ Hard Disk Drive List ]
Mode Name	Available	Type/Status
HDD0: ST3120026AS	120 GB	RAID Inside
HDD1: ST3120026AS	120 GB	RAID Inside

[ RAID Disk Drive List ]	Save to Disk & Exit (Y/N)?Y
Model Name	RAID Level	Capacity	Status	Members(HDDx)
RDD0: GRAID	0-Stripe	240 GB	Normal	01

[ TAB]-Switch Window [ ]-Select ITEM [ENTER]-Action [ESC]-Exit

Figure 12

- 91 - Appendix