IR Transmission delay:

Full duplex mode permits simultaneous bi-directional transmission. Half duplex mode permits transmission in one direction only at a time. Select Disabled if there is no infrared port present.

Onboard Parallel Port:

Select a logical LPT port name and matching address for the physical parallel (printer) port. The available choices are 378H/IRQ7, 278H/IRQ5, 3BCH/IRQ7, Disabled.

Parallel Port Mode:

Select an operating mode for the onboard parallel port. Select Compatible or Extended unless you are certain both your hardware and software support EPP or ECP mode. The available choices are SPP, ECP+EPP1.7, EPP1.7+SPP, EPP1.9+SPP, ECP, ECP+EPP1.9, and Normal.

ECP Mode Use DMA:

Select a DMA channel for the port. The available choices are 3, 1.

EPP Mode Select:

This item allows you to determine the IR transfer mode of onboard I/O chip. The available choices are EPP1.9, EPP1.7.

LCD Panel Type:

This option allows you to select the panel display type and resolution installed on your system.

Panel#

 

Panel Type

0

1024*768 Dual Scan STN Color Panel

1

128*1024 TFT Color Panel

2

640*480

Dual Scan STN Color Panel

3

800*600

Dual Scan STN Color Panel

4

640*480

Sharp TFT Color Panel

5

640*480

18-bit TFT Color Panel

6

1024*768 TFT Color Panel

7

800*600 TFT Color Panel

8

800*600 TFT Color Panel (Large BIOS ONLY)

9

800*600 TFT Color Panel (Large BIOS ONLY)

10

800*600 Dual Scan STN Color Panel (Large BIOS ONLY)

11

800*600 Dual Scan STN Color Panel (Large BIOS ONLY)

12

1024*768 TFT Color Panel (Large BIOS ONLY)

13

1280*1024 Dual Scan STN Color Panel (Large BIOS ONLY)

14

1024*600 Dual Scan STN Color Panel (Lange BIOS ONLY)

15

1024*600 TFT Color Panel (Lange BIOS ONLY)

52