LCD&CRT:

The category selects the type of video adapter used for the system monitor. Although secondary monitors are supported, you do not have to select the type in Setup.

BOTH

Enables display of both CRT and LCD

LCD

Enables display of LCD displays only

CRT

Enables display of CRT displays only

Auto

Auto detects the installed display on the system

Halt On: The category determines whether the computer will stop if an error is detected during power up.

No errors

The system boot will not be stopped for any error that

 

may be detected.

All errors

Whenever the BIOS detects a non-fatal error the

 

system will be stopped and you will be prompted.

All,

The system boot will not stop for a keyboard error; it will

But Keyboard

stop for all other errors.

All, But

The system boot will not stop for a disk error; it will stop

Diskette

for all other errors.

All, But

The system boot will not stop for a keyboard or disk

Disk/Key

error; it will stop for all other errors.

Memory:

The category is display-only that is determined by POST (Power On Self Test) of the BIOS.

Base Memory: The POST will determine the amount of base (or conventional) memory installed in the system. The value of the base memory is typically 512K for systems with 512K memory installed on the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.

Extended Memory: The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1MB in the CPU's memory address map.

Total Memory: This refers to the memory located in the 640K to 1024K address space. This is memory that can be used for different applications. DOS uses this area to load device drivers in an effort to keep as much base memory free for application programs. The BIOS is the most frequent user of this RAM area since this is where it shadows RAM

33