Power Management:

This category allows you to select the type (or degree) of power saving and is directly related to the following modes:

Doze Mode

Suspend Mode

Standby Mode

HDD Power Down

There are four selections for Power Management, three of which have fixed mode settings.

Disable

No power management. Disables all four modes

(default)

 

Min.

Minimum power management. Doze Mode = 1 hr. Standby

Power

Mode = 1 hr., Suspend Mode = 1 hr., and HDD Power Down =

Saving

15 min.

Max.

Maximum power management -- ONLY AVAILABLE FOR SL

Power

CPU’S. Doze Mode = 1 min., Standby Mode = 1 min., Suspend

Saving

Mode = 1 min., and HDD Power Down = 1 min.

User

Allows you to set each mode individually. When not disabled,

Defined

each range is from 1 min. to 1 hr. except for HDD Power Down

 

that ranges from 1 min. to 15 min. and disable.

PM Control by APM:

When enabled, an Advanced Power Management device will be activated to enhance the Max. Power Saving mode and stop the CPU internal clock. If the Max. Power Saving is not enabled, this will be preset to No.

Video Off Method:

This determines the manner in which the monitor is blanked.

V/H SYNC+Blank

This selection will cause the system to turn off the

 

vertical and horizontal synchronization ports and

 

write blanks to the video buffer.

Blank Screen

This option only writes blanks to the video buffer.

DPMS

Initial display power management signaling.

Video Off After:

When enabled, this feature allows the VGA adapter to operate in a power saving mode.

N/A Monitor will remain on during power saving modes.

Suspend Monitor blanked when the systems enters the Suspend mode.

Standby Monitor blanked when the system enters Standby mode.

Doze Monitor blanked when the system enters any power saving mode.

44