4.12 Supervisor/User Password Setting
ROM PCI/ISA BIOS (2A69KD2L)
CMOS SETUP UTILITY
AWARD SOFTWARE, INC.
STANDARD CMOS SETUP |
| INTEGRATED PERIPHERALS |
| ||
BIOS FEATURES SETUP |
| SUPERVISOR PASSWORD |
| ||
CHIPSET FEATURES SETUP |
| USER PASSWORD |
| ||
POWER MANAGEMENT SETUP |
| IDE HDD AUTO DETECTION |
| ||
PNP/PCI CONFIGURA |
| Enter Password : |
| ETUP |
|
LOAD BIOS DEFAULT |
|
| SAVING |
| |
|
|
|
| ||
LOAD SETUP DEFAULTS |
|
|
|
| |
Esc : Quit |
| : Select Item |
| ||
F10 : Save & Exit Setup |
| (Shift) F2 : Change Color |
| ||
Change / Set / Disable Password
You can set either supervisor or user password, or both of then. The differences between are:
supervisor password: can enter and change the options of the setup menus.
user password: just can only enter but do not have the right to change the options of the setup menus.
When you select this function, the following message will appear at the center of the screen to assist you in creating a password.
ENTER PASSWORD:Type the password, up to eight characters in length, and press <Enter>. The password typed now will clear any previously entered password from CMOS memory. You will be asked to confirm the password. Type the password again and press <Enter>. You may also press <Esc> to abort the selection and not enter a password.
To disable a password, just press <Enter> when you are prompted to enter the password. A message will confirm the password will be disabled. Once the password is disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED.53