BIOS SETUP
USB Keyboard Support
By default, this field is set to Disabled.
USB Mouse Support
By default, this field is set to Disabled.
AC97 Audio
The default setting of the AC97 Audio is Auto.
CSA LAN (Giga-LAN)
The default setting of the onboard Gigabit LAN is enabled.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the CPU card and you wish to use it. If you install an
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and their addresses. The default values for these ports are:
Serial Port 1 | 3F8/IRQ4 |
Serial Port 2 | 2F8/IRQ3 |
Parallel Port | 378H/IRQ7 |
UART Mode Select
This field determines the UART 2 mode in your computer. The default value is Normal. Other options include IrDA and ASKIR.
Parallel Port Mode
This field allows you to determine parallel port mode function.
SPP | Standard Printer Port |
EPP | Enhanced Parallel Port |
ECP | Extended Capabilities Port |
Power After PWR-Fail
This field refers to the power status (ON/Off) of the system when the power returns to the system after power is cut off.
Onboard Lan Boot ROM
By default, the on board LAN boot ROM is enabled.
IB865 User’s Manual | 45 |