INSTALLATIONS
Installing the Memory
The Mi910 board supports two DDR2 memory socket for a maximum total memory of 鷘GB in DDR2 memory type.
Installing and Removing Memory Modules
To install the DDR2 modules, locate the memory slot on the board and perform the following steps:
1.Hold the DDR2 module so that the key of the DDR2 module aligned with that on the memory slot.
2.Gently push the DDR2 module in an upright position until the clips of the slot close to hold the DDR2 module in place when the DDR2 module touches the bottom of the slot.
3.To remove the DDR2 module, press the clips with both hands.
Lock | DDR2 Module | Lock |
|
Lock
Lock
MI910 User’s Manual | 7 |
