Intel PCM-6896 manual Specifications

Specifications

CPU: Intel FC-PGA 370-pin Pentium III and Celeron CPU’s (with system bus frequencies of 66/100/133MHz)

CPU Socket: Intel socket 370

BIOS: Award 2MB Flash BIOS

Chipset: Intel 815E

I/O Chipset: ITE-8712. Fully 16-bit I/O decoded. Windond 83977EF as 2nd SIO for COM3, COM4 port.

ISA bus interface: Winbond W83626 LPC to ISA bridge.

Memory: Onboard One 168-pin DIMM socket supports up to 512 MBbytes SDRAM (PC 100/133 support)

Enhanced IDE: Supports two IDE devices. Supports Ultra DMA/100 mode with transfer rate up to 100MB/sec.

Connector: One 40-pin (2.54mm) pin header with box

FDD interface: Supports up to two floppy disk drives, 5.25” (360KB and

1.2MB) and/or 3.5” (720KB, 1.44MB and 2.88MB)

Connector: One 34-pin (2.54mm) pin header with box

Parellel Port: One bi-directional parallel port. Supports SPP, ECP, and EPP modes

Connector: One 26-pin (2.00mm) pin header

Serial Port: Three RS-232 serial ports, can be configured as COM1, COM2, COM3, COM4, or disabled individually and one RS-232/422/ 485(COM2). Either COM1, COM2 can be S/W configurable to support Ring wake up function and COM3, COM4 provide the option to select12V/ Ring function by jumper setting (16C550 equivalent)

Connector: One 40-pin (2.54mm) pin header