Intel PCM-6896 manual IDE Hard Drive Connector CN7

IDE Hard Drive Connector (CN7)

If customers have (Neccessity) to use ATA-100 HDD and ATA-33 CABLE you must alter two settings in the Award BIOS. The two settings are IDE Primary Master UDMA and IDE Primary Slave UDMA. Set these two functions as disabled.

IDE Hard Drive Connector (CN7)

Pin	Signal	Pin	Signal
1	IDE RESET	2	GND
3	DATA 7	4	DATA 8
5	DATA 6	6	DATA 9
7	DATA 5	8	DATA 10
9	DATA 4	10	DATA 11
11	DATA 3	12	DATA 12
13	DATA 2	14	DATA 13
15	DATA 1	16	DATA 14
17	DATA 0	18	DATA 15
19	GND	20	N/C
21	REQ	22	GND
23	IO WRITE	24	GND
25	IO READ	26	GND
27	IO READY	28	GND
29	DACK	30	GND
31	IRQ14	32	N.C.
33	ADDR 1	34	ATA66 DETECT
35	ADDR 0	36	ADDR 2
37	CS#1	38	CS#3
39	IDEACTP	40	GND