C H A P T E R 2
13Use a text editor to modify the AUTOEXEC.BAT file as follows (\PCTCP is the default installation directory):
•Move the line containing the STARTNET.BAT command or the lines containing the network driver files to immediately above the line
SET PCTCP=C:\PCTCP\PCTCP.INI
•Add the line
C:\PCTCP\ODIPKT
after the line
PCTCP=C:\PCTCP\PCTCP.INI
14Save the file and exit the text editor.
15Copy the file ODIPKT from disk 5 of the FTP PC/TCP installation disks to the directory into which PC/TCP was installed.
16Reboot the PC.FTP PC/TCP 3.X with OnNet 1.1 with Windows 3.1
FTP PC/TCP 3.X with OnNet 1.1 with Windows 3.1
1Run the Intel Installation Program from the Installation Disk.
2From the Select Network Operating System screen, choose FTP PC/ TCP.
3Follow the prompts to complete the Intel installation.
4Run the PC/TCP installation program OnNet 1.1.
5When prompted, insert the Intel Network Drivers Disk.
6Follow prompts to complete the PC/TCP installation.
7a For an NDIS installation, reboot the PC.
7b For ODI installation, do not reboot. Continue with step 8.
Additional Steps for ODI Installation
If you are using an ODI driver, continue with the following steps:
8Change to the directory into which PC/TCP was installed.
9Use a text editor to change the file PCTCP.INI as follows:
34
