Intel PRO appendix Windows 95 Support, Parameter Default Valid Values Registry

C H A P T E R 3

The network node address can be modified by manually editing the registry and adding the parameter ‘NetworkAddress’ with a hexadecimal string value, such as ‘00A0C9112233’. If the user does NOT specify a ‘NetworkAddress’ then the M32A.SYS driver uses the network node address contained in the PRO/100 CardBus adapter Card Information Structure.

Windows 95 Support

The M32A.SYS driver also supports the networking environment in Microsoft Windows 95.

The files necessary for using M32A.SYS with Windows 95 include:

NETM32A.INF	Intel installation file for Windows 95
M32A.SYS	Intel NDIS 3 driver for Windows 95

There are user-configurable parameters to the M32A.SYS driver which can be modified using the Network Control Panel built into Windows 95. This applet queries the user for parameter selections and then sets the corresponding parameters in the registry. The user-configurable parameters are as follows:

Parameter	Default Valid	Values	Registry
Value
DIRECTENABLE	AUTODETECT	OFF, ON,
		AUTODETCT	0
EARLYTRANSMIT	ON	OFF	0
		ON	1
LINESPEED	AUTO	AUTO DETECT 0
		10 MBPS	1
		100 MBPS	2
LINEMODE	0	AUTODETCT	0
		HALF-DUPLEX 1
		FULL-DUPLEX 2
INTERRUPTSYTLE	0	AUTODETECT	0
		PCI-IRQ	1
		ISA-IRQ	2

78