Intel PRO appendix Mem

Configuration Reference

	For 32-bit NDIS3 Driver (M32A.SYS):
	LINESPEED forces operation to 10 or 100
	Mbps. Valid parameters are AutoDetect, 10
	Mbps, and 100 Mbps. Default keyword is
	AutoDetect.
LINKDISABLE	disables link integrity for non-IEEE 10BASE-T
	networks such as StarLAN 10. Without this
	keyword in the driver command line, the driver
	defaults to link integrity ENABLED.
MEM	see MEMORY.
MEMORY	specifies the host PC memory location for the
	Intel adapter in hexadecimal notation, when
	MODE MEMORY (memory-mapped I/O) is
	being used (see MODE). The memory block
	occupies 4 Kbytes of host memory.
MODE	set this keyword to IO to disable requests for
	memory-mapped mode on systems that only
	support an I/O-driven card. The MEMORY
	setting provides increased performance on
	computers that allow simultaneous availability of
	memory and I/O resources.
NETWORKADDRESS	allows user to override adapter’s unique network
	node address by specifying a different node
	address.
NOBURST	disables burst mode reads on the PRO/100
	CardBus adapter. Using this keyword will force
	the adapter to initiate a bus-master request for
	each read, negatively impacting performance.
NOCHECK	disables verification of adapter resources. If the
	driver detection and verification code is causing
	problems when loading, this keyword can be
	used to turn the feature off.
NODEADDRESS	see NETWORKADDRESS.
NOEARLYRX	disables Advanced Look-ahead Pipelining
	features of the adapter. This keyword may be
	used to troubleshoot systems that have
	inexplicable network problems. Using this
	keyword may negatively impact performance.
NOEARLYTX	disables early transmit capability of the Adapter.
	This keyword may be used to troubleshoot
	systems that have inexplicable network
	problems. Using this keyword may negatively
	impact performance.

85