Intel SBC-370 manual Precautions, Battery Replacement Caution

Brand or product names are trademarks or registered trademarks of their respective owners.

Windows and Windows NT are registered trademarks of Microsoft Corp. in the United States and other countries.

This document is copyrighted by Xycom Automation, Incorporated (Xycom Automation) and shall not be reproduced or copied without expressed written authorization from Xycom Automation.

The information contained within this document is subject to change without notice. Xycom Automation does not guaran- tee the accuracy of the information.

Precautions

Some components on SBC-370 are very sensitive to static electric charges and can be damaged by a sudden rush of power. To protect it from unintended damage, be sure to follow these precautions:

Ground yourself to remove any static charge before touching the SBC-370. You can do this by using a grounded wrist strap at all times or by frequently touching any conducting materials that are connected to the ground.

Handle your SBC-370 by its edges. Don't touch IC chips, leads, or circuitry if not necessary. Do not plug any connector or jumper while the power is on.

Do not put your SBC-370 unprotected on a flat surface because it has components on both sides.

BATTERY REPLACEMENT CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

2