Hardware Monitoring System

Built-in LM78 hardware monitoring system

Monitors power supply voltage and fan speed status

IrDA Port

Supports Serial Infrared (SIR) and Amplitude Shift Keyed IR(ASKIR) interface

USB Port

Supports two USB ports for future expansion

ISAPLUS

Enhance the ISA bus drive capability

E2Key™

1Kbit EEPROM (nonvolatile memory)

Accepts read/write data by customer's program

Stores system ID, password, and critical data on the board

Watchdog Timer

Can be set by 1, 2, 10, 20, 110, or 220 second periods

Reset or NMI is generated when CPU does not periodically trigger the timer

Your program uses hex 043 and 443 to control the watchdog and generate a system reset

Flash Disk - DiskOnChip™

100% compatibility with hard disk

Supports M-Systems

Built-in True FFS Transparent Flash Block Management and Space Reclamation, which allows the use of the Flash Disk with DOS command with no need for any extra software utility

2 MB to 144 MB

ATX Power Supply Function

Connect to the backplanes and /or the ISBC card

Power Consumption

+5V/6.8A (Celeron 333 MHz, 512 MB SDRAM), +12V/170mA (maximum), -12V/60mA (maximum)

Features

8

Page 7
Image 7
Intel SBC-370 manual Hardware Monitoring System, IrDA Port, USB Port, E2Key, Watchdog Timer, Flash Disk DiskOnChip