Intel SBC-370 manual Normal normal parallel port mode

Serial Port B Mode >: Specify the mode of serial port 2.

IR Duplex Mode >: Specify the mode of IR device that is connected to the IR port.

IrDA Protocol >: Specify the function mode if an IrDA mode is selected.

Onboard Parallel Port >: Specify the I/O port address of the parallel port.

Parallel Port Mode >: Used to specify the mode of parallel port. The options are:

•Normal (normal parallel port mode)

•Bi-Dir(supports bidirectional transfer)

•EPP (supports devices that comply with the Enhanced Parallel Port specification)

•ECP (supports devices that comply with the Extended Capabilities Port)

Parallel Port IRQ >: This option is used to assign certain IRQ to the parallel port. The opti- mal and fail-safe setting is 7.

Parallel Port DMA Channel >: This function is available only if the parallel port mode is ECP. The optimal and fail-safe setting is 3.

Onboard IDE >: Define which onboard IDE controller channel(s) should be used. Avail-

able options are: Primary, Secondary, Both, and Disabled.

35 AMI BIOS Setup Menus