Intel SBC-776 LCD or VGA Enable Header (JP10), VGA connector (CN6)

SBC-776
28 SBC-776 Manual BC-599/596
LCD or VGA Enable Header (JP10)
* Default VGA Dual Display
1 3 5
1 3 5
2 4 6 2 4 6
VGA/LCD Enable
LCD 2PIXS/CLK
VGA Enable
LCD 1PIXS/CLK
VGA connector (CN6)
The mainboard's PCI SVGA interface can drive conventional CRT
displays and is capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive
LCD, and active LCD displays. The board has two connectors to
support these displays, one for standard CRT VGA monitors and
one for flat panel displays.
VGA display connector (CN6)
CN6 is a 15-pin, dual-in-line header used for conventional CRT
displays. A simple one-to-one adapter can be used to match CN6 to
a standard 15-pin D-SUB connector commonly used for VGA.
VGA display connector (CN6)
Pin Signal Pin Signal
1 RED 9 VCC
2 GREEN 10 GND
3 BLUE 11 N/C
4 N/C 12 DDDA
5 GND 13 H-SYNC
6 G ND 14 V-SYNC
7 GND 15 DDCK
8 GND 16 N/C