Manuals / Intel / Computer Equipment / Computer Hardware

Intel SG-81, SG-80 user manual BIOS Setup

Models: SG-81 SG-80

1 56

Download 56 pages 16.1 Kb

Page 29

Manual background

BIOS Setup	3-5

IDE Devices (None)

Your computer has two IDE channels (Primary and Secondary) and each channel can be installed with one or two devices (Master and Slave). Use these items to configure each device on the IDE channel.

This motherboard features two SATA connectors supporting two SATA drives. SATA refers to Serial ATA (Advanced Technology Attachment), the standard interface for the IDE hard drives which are currently used in most PCs.

Press <Enter> to display the IDE submenu:

IDE HDD Auto-Detection

Press <Enter> while this item is highlighted to prompt the Setup Utility to automatically detect and configure an IDE device on the IDE channel.

NOTE: If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter box. Choose the line that lists LBA for an LBA drive.

IDE Channel 1/2 Master/Slave/ IDE Drive(Auto)

Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. If it fails to find a device, change the value to Manual and then manually configure the drive by entering the characteristics of the drive in the items described below.

User’s Manual

Image 29

Intel SG-81, SG-80 user manual BIOS Setup

Contents

Intel Pentium 4 System Board Socket User’s Manual SG-80SeriesSG-80, SG-81 Copyright and Warranty Notice Chapter 3. BIOS Setup Hardware SetupChapter IntroductionChapter Driver InstallationAppendix A. How to Get Technical Support Chapter 1. Introduction 1.1. Features & SpecificationsProduct List Back Panel I/OMiscellaneous User’s Manual 1.2. Layout Diagram SG-80Introduction SG-80Series 1.3. Layout Diagram SG-811.4. Jumpers & Connectors Description Chapter SG-80Series2.1. CPU Socket Chapter 2. Hardware SetupDIMM 2.2. System MemoryDIMM Module Total Memory2.3.1.ATX Power Connectors ATX_POWER, ATX12V 2.3. Connectors, Headers, and SwitchesSG-80Series 2.3.2.FAN Connectors CPUFAN, SYSFAN, PWRFAN•CPUFAN: Power connector for CPU cooling fan •Pin 2-3shorted default: Normal operation Hardware Setup2.3.3.CMOS Memory Clearing Header CCMOS •Pin 1-2shorted: Clear CMOS memorySG-80Series DefinitionDefinition Hardware Setup AUD_MIC User’s Manual Hardware Setup2.3.7.Accelerated Graphics Port Slot AGP1 SG-80Series 2.3.8.Internal Audio Source Connectors CD1, AUX12.3.9.Floppy Disk Drive Connector FDC SG-80Series 2.3.10.IDE Disk Drive Connectors IDE1, IDE2Hardware Setup 2.3.11.Serial ATA connectors SATA1, SATA22-13 User’s Manual2.3.12.External I/O Panel 3.1. About the Setup Utility Chapter 3. BIOS SetupFUNCTION 3.1.2.Entering the Setup Utility←↑↓→ +/-/PU/PD3.1.3.Updating the BIOS 3.2.1.Standard CMOS Features 3.2. Using BIOSBIOS Setup SG-80Series CPU Feature 3.2.2.Advanced BIOS FeaturesBIOS Setup User’s ManualHard Disk Boot Priority BIOS Setup 3.2.3.Advanced Chipset Features DRAM Clock/Timing Control BIOS Setup3-11 DRAM Timing ControlAGP & P2P Bridge Control OnChip AGP Control OnChip IDE Device 3.2.4.Integrated PeripheralsBIOS Setup OnChip PCI Device Onboard SuperIO Device BIOS Setup3-17 User’s Manual3.2.5.Power Management Setup BIOS Setup 3.2.6.PnP/PCI Configurations IRQ Resources 3.2.7.PC Health Status 3.2.8.Frequency Control 3.2.9.Load Fail-SafeDefaults Option3.2.11.Set Password 3.2.10.Load Optimized Defaults Option3.2.13.Exit Without Saving 3.2.12.Save & Exit Setup OptionChapter SG-80Series3-26 User’s Manual Chapter 4. Driver InstallationDriver Installation •Drivers 4.1. Setup Items•Manual •UtilityUser’s Manual Appendix A. How to Get Technical SupportHow to Get Technical Support SG-80Series Appendix Aalt.comp.periphs.mainboard.abit comp.sys.ibm.pc.hardware.chipsUser’s Manual How to Get Technical SupportJan van Riebeeckweg 15, 5928LG, Venlo SG-80Series Technical Support FormAppendix A