IDE Disk Drive Connectors IDE1, IDE2 | Intel SG-80, SG-81 specification

2-12	Chapter 2

2.3.10.IDE Disk Drive Connectors (IDE1, IDE2)

These IDE ports each connects up to two IDE drives at Ultra ATA/100 mode by one 40-pin, 80-conductor, and 3-connector Ultra ATA/66 ribbon cables. Connect the single end (blue connector) at the longer length of ribbon cable to the IDE port on system board, and the other two ends (gray and black connector) at the shorter length of the ribbon cable to the connectors on hard drives.

NOTE: The red line on the ribbon cable should be aligned with pin-1 on this connector.

SG-80 Series

Image 22

Intel SG-80, SG-81 user manual IDE Disk Drive Connectors IDE1, IDE2

Contents

SG-80 Series Page Table of Contents Chapter Driver Installation Appendix A. How to Get Technical Support Features & Specifications Miscellaneous Model Chipset FeaturesBack Panel I/O Product List Layout Diagram SG-80 Layout Diagram SG-81 Jumpers Description Default Setting Jumpers & Connectors DescriptionConnectors Description SG-80 Series Hardware Setup CPU Socket Dimm Module Total Memory System MemoryTotal System Memory Connectors, Headers, and Switches ATX Power Connectors ATXPOWER, ATX12V FAN Connectors CPUFAN, SYSFAN, Pwrfan Pin 2-3 shorted default Normal operation Cmos Memory Clearing Header Ccmos Front Panel Switches & Indicators Connection Headers PANEL1 Pin Definition Pin Signal Name Function Additional USB Port Connection Header USB3, USB4 Front Panel Audio Connection Header FPIO-AUDIO1 Accelerated Graphics Port Slot AGP1 Internal Audio Source Connectors CD1, AUX1 Floppy Disk Drive Connector FDC IDE Disk Drive Connectors IDE1, IDE2 Serial ATA connectors SATA1, SATA2 External I/O Panel About the Setup Utility Standard Configuration Exits the current menu Updating the Bios Standard Cmos Features Using BiosDate and Time IDE HDD Auto-Detection IDE Devices NoneIDE Channel 1/2 Master/Slave/ IDE DriveAuto Drive A/Drive B 1.44M, 3.5 in./None Access Mode AutoFloppy 3 Mode Support Disabled Video EGA/VGA Advanced Bios Features CPU Feature Hard Disk Boot Priority Quick Power On Self Test Enabled CPU L3 Cache EnabledHyper-Threading Technology Enabled First/Second/Third Boot Device Floppy/Hard Disk/CDROM Security Option Setup Advanced Chipset FeaturesATA 66/100 IDE Cable Msg. Enabled Small LogoEPA Show Dram CAS Latency Dram Clock/Timing ControlDram Timing Control RAS Active Time tRAS AGP Fast Write Support Disabled RAS to CAS Delay tRCDGraphic Window WR Combin Enabled AGP & P2P Bridge Control OnChip AGP Control System Bios Cacheable DisabledVideo RAM Cacheable Disabled AGP Data Rate Auto Integrated Peripherals OnChip IDE Device OnChip Sata Controller Enabled IDE DMA Transfer Access EnabledIDE Burst Mode Enabled Serial ATA Mode IDE OnChip LAN Controller Enabled OnChip USB Controller EnabledOnChip AC97 Controller Enabled LAN Boot ROM Disabled Onboard SuperIO Device Onboard FDC Controller EnabledParallel Port Mode ECP Onboard Serial Port 1 3F8/IRQ4 Onboard 1394 Device Enabled Power Management SetupECP Mode Use DMA Init Display First PCI Slot Power On by PS2 Mouse Disabled Resume by USB from S3 DisabledPower On by PS2 Keyboard Hot Key Wakeup By Ring Disabled PnP/PCI Configurations Resources Controlled By AutoESCD PCI/VGA Palette Snoop Disabled IRQ Resources PC Health Status CPU Shutdown Temperature DisabledSystem Component Characteristics PIRQ0 Use IRQ No. ~ PIRQ7 Use IRQ No. Auto Spread Spectrum Enabled Load Fail-Safe Defaults OptionAuto Detect DIMM/PCI Clk Enabled Frequency Control Load Optimized Defaults Option Set Password Save & Exit Setup Option Exit Without Saving SG-80 Series Driver Installation Manual Utility Setup ItemsDrivers Browse CD How to Get Technical Support User’s Manual Appendix a SG-80 Series Jan van Riebeeckweg 15, 5928LG, Venlo Technical Support Form