Intel SR1450 manual Peripheral Devices Front Features, Hard Disk Drives, Notes

Server Chassis Features

Peripheral Devices (Front Features)

The chassis provides locations and hardware for installing hard drives, a floppy drive, CD-ROM drive, or DVD-ROM drive. The drives must be purchased separately. The following figure shows the available options.

ABC

D

TP01589

A.Front power supply module

B.Slimline floppy drive or DVD-ROM drive or CD-ROM drive

C.Control panel (Local Control Panel shown)

D.Hard drive bays (3)

Figure 6. Optional Peripherals

Hard Disk Drives

There are two options for hard drive support: SCSI hot-swap or SATA hot-swap.

The middle drive bay can be converted to be used as a floppy bay. To use the bay for a floppy drive, the AXXFLOPHDDTRAY accessory kit must be used.

For instructions on installing hard drives, see “Installing and Removing a Hard Disk Drive”.

✏NOTES

Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum ambient temperature of 45 °C.

The Intel Server Chassis SR1450 does not support all SCSI or Serial ATA hard drives. See “Additional Information and Software” for an Internet link to a list of supported hardware.

Intel® Server Chassis SR1450 User Guide 21