Intel manual Intel Server Chassis SR1450 User Guide

Hardware Installations and Upgrades

6.When the black drive carrier lever begins to close by itself, push on it to lock the drive assembly into place.

A

B

TP01602

Figure 19. Inserting a Hot-swap Hard Disk Drive Assembly into the Chassis

7.(Optional) Install the front bezel. For instructions, see “Removing and Installing the Front Bezel.”

Installing or Removing a Floppy Drive (Slimline or Standard)

Floppy drives are installed in different ways, depending on the following items:

ƒYou want to install the floppy drive into the slimline drive bay.

ƒYou have installed a CD-ROM or DVD-ROM drive into the slimline drive bay. You want to install the floppy drive into a bay that was intended for a hard drive (optional conversion kit is required).

Look carefully at the heading titles below before beginning your installation to be sure you are following the correct instructions for your system.

CAUTION

Floppy drives are NOT hot swappable. Before removing or replacing the drive, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet.

Intel® Server Chassis SR1450 User Guide 33