Intel SR1450 manual system or wall outlet

Hardware Installations and Upgrades

Removing and Installing the SATA or SCSI Backplane

Your server chassis must be configured with one of the following drive installation options:

ƒA hot-swap SCSI option that came with a SCSI backplane board.

ƒA hot-swap SATA option that came with a SATA backplane board.

CAUTION

The backplane is tool-less, but NOT hot swappable. Before removing or replacing the backplane, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the

system or wall outlet.

The backplane board and the hardware that came with the backplane can be replaced if your backplane fails or if a different option is required. To replace the backplane, use the following instructions to remove and then to install a backplane.

Intel® Server Chassis SR1450 User Guide 63