1.7 Panel Mounting

1.There is a piece of adhesive waterproof gasket on the Mg-AL front bezel. Make sure the waterproof gasket is in position before installing the TPC-1070 to the panel opening.

2.Install the TPC-1070 to the panel opening.

3.Find out the eight clampers and eight long screws in the accessory pack. Hook those clampers to those holes around the four sides of the bezel. Insert the screws to every clamper and fasten them. These screws will then push on the mounting panel and fix the unit.

4.The mounting panel thickness is suggested to be less than 10mm (0.236 inch).

Figure 1.2: Panel Mounting

7

Chapter1

Page 19
Image 19
Intel TPC-1070 user manual Panel Mounting