2Install the following required software:
a.Microsoft Windows NT Server 4.0
Select the scenario below (1 or 2) which matches your installation to complete the Microsoft Windows NT SCSI diskette miniport driver installation.
1.If you are installing NT with boot disks (booting from diskettes initially to setup NT), during install let NT detect the storage devices in your system. When device detection is complete, select “S” to specify additional storage devices, then select “Other”. Insert the Microsoft Windows NT SCSI Miniport Diskette (created in step 1 above) in the floppy drive. Press Enter to select the “I2O Miniport Driver” and continue with the NT installation. Go to step b.
2.If you are installing NT without boot disks, for example, you are booting with the NT Server
b.During the Windows NT Server 4.0 installation install:
•TCP/IP
•Microsoft Internet Information Server 2.0 (TCP/IP must be installed prior to installing Internet Information Server).
c.After completing the NT installation, install the following components and software:
•Microsoft Windows NT 4.0 Service Pack 5 or greater. (This will automatically upgrade Internet Information Server 2.0 to Internet Information Server 3.0.)
•Microsoft Internet Explorer 4.01 Service Pack 1 (recommended) or greater or Netscape Navigator 4.05 or greater.
✏NOTE
If your browser is configured to use a proxy server, ensure that it is configured to bypass the proxy server for local addresses. See the User's Manual for details on configuring a browser to bypass the proxy server for local addresses.
✏NOTE
Due to added security in Intel Integrated RAID, anonymous connections must be disabled in Microsoft Internet Information Server in order to execute the Intel Integrated RAID Storage Console in NT.
10 | Intel Server RAID Controller |
