d.Insert a blank
2Insert the NetWare Installation
3When the device driver installation screen appears, Select additional or modify selected Disk / LAN drivers.
4Choose Select an additional driver. Select Insert to install an unlisted driver. Ensure that the SRCU31L NetWare Installation diskette (created in Step 1) is in the floppy drive and press Enter. Select BKSTROSM.HAM from the list.
5Continue with the NetWare installation as normal by following the screen prompts.
6Once the server installation is finished, complete the installation of the Intel Integrated RAID software suite by following the steps below.
7Run LOAD INSTALL.
8Select Product Options, then Install product not listed. It will tell you that it is going to scan the A: drive for installation scripts. Ensure the SRCU31L NetWare Installation diskette is in the floppy drive, press Enter to continue.
9A screen prompt will ask which components (see below) you wish to install. Select the following components and press F10 to continue.
BKSTROSM.HAM
HTTP and Winsock Services
RAID Management Agents
The appropriate files are copied and the AUTOEXEC.NCF and STARTUP.NCF files are modified as necessary.
CAUTION
Once the product is installed, check for and remove any duplicate lines in STARTUP.NCF. For example, NetWare 4.2 installations may insert an extra load line for the module PK411.NLM. Remove the extra line.
10After the installation is complete, reboot the server.
11Load Support Pack 8a and reboot.
12See Chapter 4, “Using the Storage Console” in the user’s manual for instructions on customizing your RAID volumes using Storage Console.
Intel Server RAID Controller | 13 |
Quick Start Guide |
|