12A screen prompt will ask which components (see below) you wish to install. Select the following components and press F10 to continue. See figure below.

BKSTROSM.HAM

HTTP and Winsock Services

RAID Management Agents

Preselect Components

The appropriate files are copied and the AUTOEXEC.NCF and STARTUP.NCF files are modified as necessary.

13After the installation is complete, reboot the server.

✏NOTE

See Chapter 4, “Using the Storage Console” in the user’s manual for instructions on customizing your RAID volumes using Storage Console.

Setup and Installation for UnixWare† 7.1 or 7.1.1

Software Requirements

∙SRCU31L CD-ROM

∙Hard disk space: minimum 20 MB

∙SRCU31L UnixWare Installation Disk (HBA diskette) (one blank high density floppy diskette required)

∙SCO UnixWare 7.1 or 7.1.1 software with Netscape 4.08 or greater*

* Not supplied

Intel Server RAID Controller U3-1L (SRCU31L)

15

Quick Start Guide