Intelligent Motion Systems MDO17 manual MDRIVE17 Speed Control Options, Order Information

MDRIVE17 SPEED CONTROL – OPTIONS

Control Knob

The MDrive17 is available with a factory-mounted rear control knob for manual shaft positioning.

Planetary Gearbox

Efficient, low maintenance Planetary Gearbox are of- fered assembled with the MDrive17. Details inside.

Encoder

The MDrive17 is available with a factory-mounted optical encoder. Available line counts are 100, 200, 250, 400, 500 or 1000. All encoders, except 1000 line, have an index mark. Encoders are avail- able in both single-end and differential configurations. Order optional Encoder Cables separately:

Single-end Cable (12"/30.5cm) ..... ES-CABLE-2

Differential Cable (36"/91.5cm)..... ED-CABLE-2

Linear Actuator

The MDrive17 with long life Acme Screw Linear Actua-

tor is available with the following travel/full step:

Screw A	0.00125”/full step
Screw B	0.000625”/full step
Screw C	0.0003125”/full step
Screw D	0.00015625”/full step

Standard screw length is 6.0” (152.4mm) plus the mounting end thread. Custom lengths from 2.0” to 24.0” are available without mounting end thread.

Linear Actuators are Non-Captive style. Contact the factory regarding Captive Shaft or External styles.

Parameter Setup Cable

A low cost accessory which eliminates the need for users to wire communications. This 6' (1.8m) cable includes built-in logic level shifting circuitry to accom- modate the 3.3v ports on some PCs and plugs in easily to connect a standard DB-25 PC parallel/SPI port to the MDrive's 10 pin pin-header (P2). Order Cable Part No. MD-CC100-000.

ORDER INFORMATION

MDRIVE17 SPEED CONTROL

Stack Sizes

13†= Single Stack & Linear Actuator

15 = Double Stack

19 = Triple Stack

MDO 17 OPTION

Interface Options

F = 12” Flying Leads

P = Pluggable Clamp

Type Terminal Strip

Example #1: Part Number MDOP1719 is an MDrive17 Speed COntrol with Pluggable Interface, NEMA 17 motor, stack size 19.

OPTIONS

Control	N					Example #2: MDOP1719N
Knob						Adds a Control Knob
						to the part shown in example #1.
Planetary	G					Example #3: MDOP1719G5
Gearbox						Rounding ratio to the nearest whole number,
						the above adds a Planetary Gearbox with
	Gearbox Ratio					5.18:1 ratio to the part shown in example #1.
	Rounded to Nearest Whole Number					Add -F if optional NEMA Flange is desired.
Encoder	E					Example #4: MDOP1719ED500
						Adds a 500 line count Differential Encoder
	S = Single End		Line Counts: 100, 200,			to the part shown in example #1.
	D = Differential		250, 400, 500, 1000
Linear	L					Example #5: MDOP1713LC10.5
Actuator†						MDrive17 Speed Control Linear Actuator
						with a 0.0003125”/Full Step Acme
Screw Type (Travel/Full Step)			Custom Screw Length			Screw custom cut to 10.5”.
A = 0.00125”				Range 2.0” to 24.0”		MAY NOT be combined with other options.
B = 0.000625”					Format XX.X	Note: MDrive17 Linear Actuator
C = 0.0003125”			eg. 08.5 for an 8.5” Screw
						Available ONLY in Stack Size 13
D = 0.00015625”		(6.0” Screw Length Standard)

†Linear Actuator Available ONLY in Stack Size 13. (MDOX1713LX)

	TECHNICAL SUPPORT	IMS EUROPE GmbH
	Eastern U.S.	Hahnstrasse 10, VS-Schwenningen
	Phone: 860/295-6102	Germany D-78054
	Fax: 860/295-6107	Phone: +49/7720/94138-0
P.O. Box 457, 370 N. Main Street	E-mail: etech@imshome.com	Fax: +49/7720/94138-2
Marlborough, CT 06447 U.S.A.	Western U.S.	E-mail: info@imseuropehome.com
	Phone: 760/966-3162	European Sales Management
Phone: 860/295-6102	Fax: 760/966-3165	4 Quai Des Etroits
Fax: 860/295-6107	E-mail: wtech@imshome.com	69005 Lyon, France
E-mail: info@imshome.com	IMS MOTORS DIVISION	Phone: +33/4 7256 5113
		Fax: +33/4 7838 1537
Home Page: www.imshome.com
	105 Copperwood Way, Suite H	E-mail: bmartinez@imshome.com
Distributed By:	Oceanside, CA 92054	German Sales/Technical Support
	Phone: 760/966-3162	Phone: +49/35205/4587-8
	Fax: 760/966-3165	Fax: +49/35205/4587-9
	E-mail: motors@imshome.com	E-mail: hruhland@imshome.com

Product information covered by IMS Product Disclaimer available at www.imshome.com.

Visit the IMS web site for the most up-to-date product information.

© 2002, 2004 Intelligent Motion Systems, Inc. All Rights Reserved. REV111104