DHCP Server Supported: All of the networked computers can retrieve TCP/IP settings automatically from this device.

Static IP Address Binding: Authorizes users to manage and configure a PC in LAN in most cases by binding the MAC address and IP address together.

System Log: History of all activity.

UPnP: Supports Microsoft’s UPNP (Universal Plug and Play Service).

Web-Based Management: The router is easily and conveniently configured by any standard Internet Web browser.

Internet Access Control: Different settings can be set up for different users.

Packet Filter: Port filter, IP address filter, MAC address filter, key word filter.

Virtual Server: Allows other users from the Internet to access WWW, the FTP server or other servers in the LAN.

QoS (Quality of Service): Allows control of your Internet bandwidth. Set a minimum bandwidth for a certain application, or limit the bandwidth an application can consume. The router features IP- and port-based bandwidth control, as well. Scheduler: Manage and control the Internet access for individual users.

DMZ Host: Set up one computer to operate in the Demilitarized Zone without any firewall interference.

Remote Management: Remotely configure the router settings.

DDNS: Support for dynamic DNS services, such as www.dyndns.org.

Remote Wake-up:Remotely wake up PCs in the LAN.

Support VPN Pass-through:Supports VPN pass-through PPTP traffic. A user connected to the device can establish outgoing connections to remote VPN servers. VPN server: An integrated VPN server allows five simultaneous client connections.

2. INSTALLATION

2.1 Before Installation

First, confirm that your computer has a Java Script-capable Web browser installed.

Make sure that your computer has a LAN card installed and correctly configured for TCP/IP.

If using xDSL, you will need the username and password provided by your ISP. NOTE: If your computer has ADSL PPPoE dial-up software installed, back up your installation software and uninstall your ADSL PPPoE dial-up software before proceeding with the installation.

2.2 Installation

1.Set up the WAN connection: Connect the broadband RJ-45 cable (xDSL, Cable modem or LAN/leased cable) with the WAN port of the router.

2.Set up the LAN connection: Connect your computer’s LAN card port or your switch’s UPLINK port with one LAN port of the router using a common network cable. NOTE: All LAN ports of the router can automatically sense cross cable, so

4

Page 4
Image 4
Intellinet Network Solutions 523615 manual Before Installation