Intellinet Network Solutions manual Model 523615, 8-Port, Reset

2.3.2 Model 523615, 8-Port

LED	Indication
PWR	Continuously lit indicates power to the router.

RUN/CPU Slowly blinking indicates the system is operational after a proper startup.

WAN	Blinking indicates data is being transmitted to/from the Wide Area
	Network.
1–8	Blinking indicates data is being transmitted to/from the Local Area
	Network.
RESET	Approx. 5 seconds after pressing to turn on the power, the RUN LED sill
	blink quickly. Release the RESET button. (After router Reset startup, all
	configurations will restore to defaults.)

Port/Jack Indication

DC 5 V Connects to the power adapter.

WAN Connects xDSL/cable modem or special cable.

1–8 The LAN ports connect to PCs, hubs, switches and so on.

3. LOCAL COMPUTER SETUP

The High-Speed Broadband Router acts as a DHCP server, which means that it provides IP addresses to all connected computers. By default, Windows, Linux and Mac OS systems will try to obtain an IP address from a DHCP server, if present and no configuration of the computer’s IP settings are necessary. In order to test your IP settings, simply start your computer while connected to the router. Then open your Web browser and open http://192.168.10.1.

If the router’s Web Admin screen appears, you can skip this section and proceed

6