4
FINDING YOUR WAY
Axxess® Model 8560 Phone and Model 8660 IP Phone User Guide
Feature Button Functions

The feature buttons are designed to automate some of the commonly-used functions,

such as dialing an outside number. Each of these is described in the table below.

In addition to the buttons identified in the preceding table, your phone has a Special

button ( ). Depending on how your telephone system is configured, you may need

to press this button before you dial a feature code.

NOTE: Because the telephone system allows customized feature buttons, your phone

may have been reprogrammed so that the feature buttons do not match those

described in this guide.

BUTTON IF YOU... YOU CAN... PG.
Press Answer a call. 19, 22
Press and dial the number Place an outgoing call. 21
Press an unlit button or the flashing
button
Select an outside line or answer a
call.
21, 22
Press Access an intercom call. 19
Press unlit or lit Enable/disable Do-Not-Disturb mode. 42
Press and dial the numbers you
would like to add to the conference
Place a conference call. 24
Press (International Hold Symbol) Put a call on hold. 23
Press and dial the destination
number
Transfer a call. 25
Press View or access System Speed-Dial
numbers.
59
Press View or access Speed-Dial numbers. 56
Press Choose a page zone to place a page. 61
Press Redial a telephone number or save
the last number dialed.
29
Press and hang up Put a call on the speaker. 32
Press Leave or listen to a message. 34
Press Mute the microphone. 32
Press and dial the destination num-
ber
Forward calls to the specified num-
ber.
27
Press the high or low end of the Volume but-
ton
Adjust volume during a call. 48
ANSWER ANSWER
OUTGOING OUTGOING
CALL CALL
IC IC
DND DND
CNF CNF
TRANSFER TRANSFER
SYS SPDL SYS SPDL
STN SPDL STN SPDL
PAGE PAGE
REDIAL REDIAL
MSG MSG
MUTE MUTE
FWD FWD