Features

Following is a list of the Gigabit Ethernet PCI adapter features:

ITI-5100G and GF Models

•Full-duplex Gigabit Ethernet interface (IEEE P802.3-1999)

•Jumbo Frame support (optional 9,000 byte frames for server- to-server traffic)

•Standard Ethernet frame size (up to 1518 bytes)

•Dual Homing for automatic failover if a port, switch, or adapter is down

•VLANs: up to 64 VLANs per adapter using IEEE 802.1Q- 1998 tagging

•Adaptive interrupt frequency (maximizes network throughput; adapts to traffic load)

•Dual DMA channels

•33/66 MHz, 32-bit or 64-bit PCI bus master with adaptive

DMA

•Universal dual voltage signaling (3.3V and 5V)

•PCI Local Bus Rev 2.1 compliant (6.8"x 4.2")

•ASIC with on-chip MAC and dual RISC processors

•Status LEDs

ITI-5100G Model

•CAT-5 compatible twisted pair Ethernet Connector

•Interoperability with existing Ethernet and Fast Ethernet Equipment

ITI-5100GF Model

•Duplex SC fiber-optic connector

Key Protocols and Interfaces

ITI-5100G/GF adapters are interoperable with existing Ethernet equipment assuming standard Ethernet minimum and maximum frame size (64 to 1518

LSI Logic Corporation

Page 13 of 56