Invacare 1110532 service manual Acceleration FWD 35%

SECTION 5—PERFORMANCE ADJUSTMENTS

To change the programmed value for an option (i.e. Acceleration - FWD), press the key so the selection arrow points to Acceleration - FWD.

FORWARD SPEED

TURNING SPEED

➜ACCELERATION - FWD ACCELERATION - REV

Press the SELECT key. The display screen changes to the adjustment screen. The top line shows the function. The second line shows the value. At the bottom is a bar graph which shows the relative position of the current value to the total adjustment range. Pressing the

or key will adjust the value.

ACCELERATION - FWD 35%

[ ]

Pressing the key causes the value to increase and the bar graph to move to the right. Pressing the key causes the value to decrease and the bar graph to move to the left.

ACCELERATION - FWD 70%

[ ]

To save this change, press the SAVE key.

When saving to the drive program is complete, the screen will change to display:

CHANGES SAVED TO

*RWD - 2 POLE

CONTINUE? PRESS MENU

QUIT? PRESS POWER

*NOTE: The driving program selected is either RWD-2 Pole, RWD - 4 Pole, or CWD 2 - Pole. Refer to the flow chart in NX, NX-50,NX-75, NX w/ACC, and NX-B Controller on page 22 or NX-LP Controller on page 24.

Pressing the MENU key allows the adjustment sequence to be repeated for other driving programs.

Part No 1110532 21 MK5™NX™Electronics