Invacare 1143199 SECTION 4MAINTENANCE

SECTION 4—MAINTENANCE
Part No 1143199 15 InTouch™ Propel™ Back
SECTION 4—MAINTENANCE
 WARNING
Check ALL fasteners periodically to ensure that mechanical connections and
attaching hardware are tightened securely - otherwise injury or damage may occur.
DO NOT continue to use this product if problems are discovered. Corrective
maintenance can be performed at or arranged through your equipment supplier.
Maintenance MUST be performed ONLY by qualified personnel.
Replacing Upholstery
NOTE:Forthisprocedure,refertoFIGURE 4.1.
1. Removethebackcushionfromtheback
frame.RefertoInstalling/Removing
thePropelBackCushiononpage 13.
2. Unziptheupholsteryonthebackofthe
cushion.
3. Removethefoamfromtheupholstery.
4. Installthefoamintonewupholstery.
5. Zipthenewupholstery.
6. Installthecushiontothebackframe.
RefertoInstalling/Removingthe
PropelBackCushiononpage 13.
Replacing Cushion
NOTE:Forthisprocedure,referto
FIGURE 4.1.
1. Removethebackcushionfromtheback
frame.RefertoInstalling/Removing
thePropelBackCushiononpage 13.
2. Unziptheupholsteryonthebackofthe
cushion.
3. Removethefoamfromtheupholstery.
4. Installthenewcushionintothecover.
5. Zipthecover.
6. Installthebackcushiontotheback
frame.RefertoInstalling/Removing
thePropelBackCushiononpage 13. FIGURE 4.1 Replacing Upholstery -
Replacing Cushion
Foam
Upholstery
Rear
Zipper