Invacare 1143199 manual Operation, Adjusting the Propel Back Depth and Angle

SECTION 3—OPERATION

SECTION 3—OPERATION

WARNING

Check ALL fasteners periodically to ensure that mechanical connections and attaching hardware are tightened securely - otherwise injury or damage may occur.

DO NOT continue to use this product if problems are discovered. Corrective main- tenance can be performed at or arranged through your equipment supplier.

Adjusting the Propel Back Depth and Angle

NOTE: For this procedure, refer to FIGURE 3.1.

1.Loosen, but DO NOT remove, the hex bolts securing the back tab to the cane mounting brackets on both sides.

2.Adjust the back to the desired angle and/or depth.

NOTE: Use the measurement marks for as a reference to align the left and right sides. 3. Tighten the hex bolts securing the back tabs to the cane mounting brackets.

Back Tab

Hex Bolts

Back Tab

Plate

Cane Mounting

Bracket

DETAIL “A” - BACK ANGLE

AND DEPTH

Depth

1.75”

Angle27°

Back Tab

Plate

Cane Mounting

Bracket

Measurement

Marks

FIGURE 3.1 Adjusting the Propel Back Depth and Angle

InTouch™ Propel™ Back 14 Part No 1143199