Invacare 1143206 manual Depth

SECTION 9—FOOTBOARD ASSEMBLY
Pronto® M41 with SureStep® 42 Part No. 1143206
Depth
NOTE:Forthisprocedure,refertoFIGURE 9.3.
1. Removethequickreleasepinthatsecuresthefootboardassemblytothewheelchairframe.
 WARNING
Make sure the detent balls of the quick-release pin are fully released beyond the
outer edge of the tube before operating the wheelchair. Otherwise, injury and/or
damage may result.
Keep detent balls clean
2. Adjustfootboardtooneofthreemountingpositions.
3. Installthequickreleasepin.Makesurethedetentballs��areengagedwiththeouter
edgeofthetube(Detail“A” ofFIGURE 9.3).
FIGURE 9.3 Adjusting the Footboard Assembly - Depth
DETAIL “A” - TOP VIEW
OF FOOTBOARD
Quick
Release Pin
Detent Ball
Footboard
Assembly
Mounting
Hole
Shroud Three Depth
Adjustment Holes
Quick
Release Pin
Outer Edge of Tube
Detent Balls