Invacare 1143206 Disconnecting/Connecting the Joystick

SECTION 12—ELECTRONICS
Pronto® M41 with SureStep® 56 Part No. 1143206
Disconnecting/Connecting the Joystick
NOTE:Forthisprocedure,refertoFIGURE 12.3onpage 57andFIGURE 11.1on50.
Disconnecting the Joystick
1. Removethejoystickassemblyfromthewheelchairarm.RefertoRemoving/Installing
theJoystickAssemblyonpage 54.
2. Removetheseat.RefertoRemoving/InstallingtheSeatAssemblyonpage 39.
3. Removethetie‐wrapsecuringthejoystickcabletotheseatpost.
4. Removethefourmountingscrewssecuringthetopshroudtothewheelchairframe
(FIGURE 11.1).
5. Liftingup,movethetopshroudawayfromthewheelchairframeenoughtoaccessthe
joystickcableconnectors.
6. Disconnectthebatteryconnectorandtherightandleftmotorconnectorsfromthe
joystickcableconnectors(Detail“A ” ofFIGURE 12.3).
7. Pullthejoystickcableconnectorsthroughthetopshroudopening.
Connecting the Joystick
 WARNING
The joystick connectors fit together in one way only. DO NOT force them together.
1. Ifnecessary,removethetopshroud.RefertoRemoving/InstallingtheTopShroudon
page 49.
2. Insertthejoystickcableconnectorsthroughtheholeofthetopshroud.
3. Connectthebatteryconnectorandtherightandleftmotorconnectorstothejoystick
cableconnectors.
4. Positionthetopshroudontothewheelchairframe.
5. Usingthefourmountingscrews,securethetopshroudtothewheelchairframe
(FIGURE 11.1).
6. Installtheseat.RefertoRemoving/InstallingtheSeatAssemblyonpage 39.
7. Installthejoystickassemblyontothewheelchairarm.RefertoRemoving/Installing
theJoystickAssemblyonpage 54.