Invacare Auriga10 user manual Repairing a flat tyre pneumatic tyres type 260 x, Re-assembly

10.1.1 Repairing a flat tyre (pneumatic tyres type 260 x 85)

10.1.1.1 Removing a rear wheel

Requirements:

•Spanner 19 mm

•Rubber hammer

•Jack the vehicle up and place a block of wood underneath it to prop it up.

•Remove the nut that secures the wheel (1) using the 19 mm spanner.

•Remove the wheel, using the rubber hammer to coax it off of the axle by gently hitting it on the rear side.

Having trouble removing the wheel?

You might need to use a special tool. Please ask your authorized Invacare® Dealer for assistance.

Re-assembly

Re-assembly is done in reverse order. Make sure that the wheel is put back on the same side it was on, and that it runs in the same direction it did before it was removed.

51