5 Pushing the scooter by hand
The motors of the scooter are equipped with automatic brakes, preventing the scooter from rolling away out of control when the power supply is switched off. When pushing the scooter, the magnetic brakes must be disengaged.
5.1Disengaging Motors
Danger of the vehicle running away!
•When the motors are disengaged (for push operation), the electromagnetic motor brakes are deactivated! When the vehicle is parked, the levers for engaging and disengaging the motors must without fail be locked firmly into the "DRIVE" position (electromagnetic motor brakes activated)!
The lever for engaging and disengaging the motor is located on the right at the rear of the scooter.
Disengaging the motor
•Make sure the power supply is switched off (key switch).
•Push lever (1) forwards.
Engaging the motor
•Pull lever backwards.
23
