Standard
Adjustment
SlotT-nutted
Mounting
Holes
Mounting
Screws
NOTE: Your Growth Bracket may have SLOTS in- stead of Adjustment Holes.
FIXED LATERAL SWINGAW AY LATERAL
SUPPORTSUPPORT
Optional
Adjustment
Holes
FIGURE 4 - ATTACHING/ADJUSTING
THE LATERAL SUPPORTS
1.If necessary, unzip the center panel of back cover.
2.For minimal width adjustment, loosen the mounting screws and slide support bracket in or out and re- tighten mounting screws.
3.For further width and/or height adjustment, remove the two (2) mounting screws.
4.Place the lateral support in the desired mounting position.
5.Reinsert the two (2) mounting screws. Securely tighten.
6.If all attachments and adjustments are complete, zip center panel of back cover closed.
OPTIONAL ADJUSTMENT (FIGURE 4).
1.Fixed lateral supports have height and depth ad- justment holes on the outside of the padded portion of the lateral support. Follow STEPS
SWINGAWAY LATERAL SUPPORTS
Bracket Adjustment
1.Unzip center panel of back cover.
2.For width adjustment, loosen the mounting screws and slide the support bracket in or out and retighten the mounting screws.
3.For height adjustment on adult sizes, remove the two (2) mounting screws.
4.Raise or lower the lateral support and align the slots with the back holes in the desired mounting positions.
5.Reinsert the two (2) mounting screws and securely retighten.
6.Zip center panel of back cover closed.
Pad Adjustment
1.Unzip the hideaway cover and pull the cover par- tially off the pad to expose the mounting screws.
2.Remove the two (2) pad mounting screws.
3.Reposition the pad depth to the desired position.
4.Reinsert the two (2) mounting screws and securely tighten.
5.Zip the hideaway cover over the pad.
USING THE SWINGAWAY LATERAL SUPPORTS (FIGURE 5)
NOTE: The swingaway lateral supports were designed for ease in removing the individual from the KSS seating system.
1.Lift up on the lateral support and push outward, away from the wheelchair.
2.To lock lateral support in place, pull back inward until lateral support snaps in place.
Locked
Position
Unlocked
Position
FIGURE 5 - USING THE SWINGAW AY
LATERAL SUPPORTS
ATTACHING/ADJUSTING THE MOUNTING HOOKS (FIGURE 6)
Attaching the Mounting Hooks
CHILD/JUNIOR SIZES.
1.Remove four (4) mounting hooks from packaging.
2.Slide one (1) hook through the slot provided in the back cover. Attach to the upper corner, on either side of the back, with two (2) of the mounting screws pro- vided. Repeat for opposite side.
3.Attach one (1) mounting hook to the front corner, on either side of the seat, with two (2) of the mounting screws provided. Repeat for opposite side.
4
