Invacare KSS Transport Ready Option Trro, Adult Sizes, Adjusting the Mounting Hooks

ADULT SIZES.

1.Remove eight (8) mounting hooks from the packaging.

2.Slide one (1) hook through the slot provided in the back cover. Attach to the upper corner, on either side of the back, with two (2) of the mounting screws pro- vided. Repeat for opposite side.

3.Slide one (1) hook through the slot provided in the back cover. Attach to the lower corner, on either side of the back, with two (2) of the mounting screws pro- vided. Repeat for procedure for opposite side.

4.Attach one (1) mounting hook to the front corner, on either side of the seat, with two (2) of the mounting screws provided. Repeat for opposite side.

5.Attach one (1) mounting hook to the back corner, on either side of the seat, with two (2) of the mounting screws provided. Repeat for opposite side.

Mounting Hooks

Slot

*Mounting Hooks

Mounting

Screws

* Mounting

Hook

*Mounting Screws

*These items are only needed on the adult size.

Adjusting the Mounting Hooks

NOTE: Refer to the ATTACHMENT POINTS chart in this instruction sheet for adjustment locations.

1.	If necessary, unzip the back cover.
2.	CHILD/JUNIOR AND ADULT SIZES - For minimal
	width adjustment, loosen the mounting screws and
	adjust the hooks in or out and retighten the mount-
	ing screws.
3.	ADULT SIZE ONLY - If further adjustment is needed:
	a.	Remove the mounting screws that secure the
		mounting hooks to the back/seat.
	b.	Adjust the mounting hooks to desired mounting
		position.
	c.	Reinsert the mounting screws. Securely tighten.
4.	TRANSPORT OPTION - For seat adjustment, loosen

TRANSPORT READY OPTION (TRRO)

Twist Release

ClampSeat Mounting

Hooks

Four			Mounting
	(4)		Screws
		Mounting
Hooks

the mounting screws and adjust the hooks back and

forth.

NOTE: Some configurations for seat depth changes may require REVERSING seat mounting hooks.

For back adjustment, loosen the mounting screws and adjust the hooks side-to-side. Retighten the mounting screws.

WARNING

Ensure the seating system mounting brackets are correctly positioned and clamps are securely engaged. Failure to do so may result in serious bodily injury.

5.If all attachments and adjustments are complete, zip the back cover closed.

Mounting

Screws

Twist Release Clamp

Seat

Mounting

Hooks Mounting

Screws

Quick Release

Clamps

Mounting

Screws

nNOTE: For 12 and 14-inch seat depth ALL four

(4) mounting holes will be used.

nNOTE: For 16-inch seat depth the FRONT two

(2) mounting holes will be used.

Quick Release Clamps Mounting Screws

nSee NOTES

FIGURE 6 - ATTACHING/ADJUSTING THE

MOUNTING HOOKS

5