SEAT

PROCEDURE 5

INSTALLING.

WARNING

Ensure that the four (4) retaining pins securing the seat assembly to the wheelchair frame are properly engaged and locked. Other- wise, injury and/or damage may result.

1.Position the seat assembly onto the wheel- chair frame, making sure that the four (4) seat support posts align with the four (4) seat mounting supports on the wheelchair frame.

2.Allow the seat assembly to rest on the four

(4) seat support collars.

3.Grasp one (1) retaining pin and position it so that one (1) of the following occurs:

A. Pin passes through the mounting hole di- rectly below the seat support collars.

B. Pin passes through the mounting holes di- rectly below the welded collar of the seat assembly.

NOTE: If the retaining pin will NOT pass through the desired height mounting hole in the seat support post, it may be necessary to adjust the seat support post. Refer to ADJUSTING THE SEAT SUPPORT POSTS in this procedure of the manual.

4.Lock the retaining pin by performing the fol- lowing steps:

A.Swivel the retaining pin lock until it is par- allel to the retaining pin (DETAIL "A").

B.Bend the end of the retaining pin lock and position it over the end of the retaining pin (DETAIL "A").

5.Repeat STEPS 1-4 for the four (4) remaining seat support posts.

6.Reconnect the joystick. Refer to CONNECT-

ING/DISCONNECTING THE MKIV JOY- STICK in PROCEDURE 9 of this manual.

ADJUSTING THE SEAT HEIGHT

Seat Assemblies WITHOUT The Seat Support Collars (FIGURE 4)

NOTE: The seat can be adjusted to three (3) height positions.

1.Release the four (4) retaining pins locks by performing the following steps:

A.Bend the END of the retaining pin lock AWAY from the retaining pin until it is clear of the retaining pin (DETAIL "A").

B.While performing STEP A, swivel the retain- ing pin lock away from the retaining pin (DE- TAIL "A").

2.Lift up on the seat assembly to remove the weight of the seat assembly from the retaining pins.

CAUTION

When the four (4) retaining pins are re- moved the weight of the seat assembly MUST be supported to prevent it from fall- ing onto the frame.

3.Remove the four (4) retaining pins that secure the seat support posts to the wheelchair frame.

4.Adjust the seat assembly to the desired height.

WARNING

Ensure that the four (4) retaining pins securing the seat assembly to the wheelchair frame are properly engaged and locked. Other- wise, injury and/or damage may result.

NOTE: When installing the retaining pins, it neces- sary to support the weight of the seat assembly.

5.Grasp one (1) retaining pin and positioning it so that it passes through the seat mounting support AND through the desired mounting hole in the seat support post.

6.Lock the retaining pins by performing the fol- lowing steps:

A.Swivel the retaining pin lock until it is par- allel to the retaining pin (DETAIL "A").

B.Bend the end of the retaining pin lock and position it over the end of the retaining pin (DETAIL "A").

NOTE: If the retaining pin will NOT pass through the desired height mounting hole in the seat support post, it may be necessary to adjust the seat support post. Refer to ADJUSTING THE SEAT SUPPORT POSTS in this procedure of the manual.

7.Repeat STEP 2 for the seat support post lo- cated DIAGONALLY across from the seat sup- port post in STEP 2.

8.Repeat STEPS 3-4 for the two (2) remaining seat support posts.

S E A T

21

Page 20 Page 22
Page 21
Image 21
Invacare ProntoTM M6 manual Adjusting the Seat Height, Seat Assemblies Without The Seat Support Collars Figure
Page 20 Page 22

ProntoTM M6 specifications

The Invacare ProntoTM M6 is a highly regarded power wheelchair designed to enhance mobility and independence for users with varying needs. Known for its compact design, the ProntoTM M6 combines performance, comfort, and advanced technology to meet the demands of everyday living.

One of the standout features of the ProntoTM M6 is its innovative mid-wheel drive system, which provides exceptional maneuverability in tight spaces. The compact footprint allows users to navigate through indoor environments with ease, making it suitable for home use and various public spaces. With a turning radius of just 20.5 inches, it can easily negotiate doorways and hallways, allowing users to maintain their independence.

The ProntoTM M6 is equipped with advanced suspension technology that enhances stability and comfort while traversing different terrains. This feature absorbs shocks and minimizes vibrations, providing a smoother ride, whether on indoor flooring or outdoor surfaces. The overall design ensures that users experience minimal fatigue and discomfort during daily activities.

An important aspect of the ProntoTM M6 is its thoughtful ergonomic design. The adjustable seating system offers various positioning options, allowing users to customize their seating arrangement for optimal comfort. This includes adjustable armrests, footrests, and backrests, which can accommodate a wide range of user preferences and physical requirements.

Safety is a priority with the ProntoTM M6, featuring a variety of safety enhancements. The wheelchair includes anti-tippers and a reliable braking system that ensures stability and security while in motion. The intuitive joystick control allows users to operate the chair effortlessly, granting precise control over speed and direction.

Battery longevity and efficiency are also key characteristics of the ProntoTM M6. It can travel significant distances on a single charge, allowing users to enjoy extended outings without the worry of battery depletion. The wheelchair is designed for easy access to the battery compartment, making maintenance a hassle-free process.

In conclusion, the Invacare ProntoTM M6 power wheelchair stands out for its exceptional mobility, comfort, and safety features. It is perfect for those seeking independence and a reliable means of transportation. With its advanced technologies and user-friendly design, the ProntoTM M6 empowers individuals to navigate their environments confidently and comfortably.
Top Page Image Contents