SECTION
❑Ensure all spokes are uniformly tight.
❑Inspect handrims for signs of rough edges or peeling.
❑Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Check headtube locknuts for tightness.
❑Inspect casters for cracks and wear (hub and rim).
❑Inspect front casters for cracked, bent or broken spokes.
❑Clean upholstery and armrests.
❑Check front riggings for rough/sharp edges and wear.
❑Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑Inspect tires for flat spots and wear.
❑Check pneumatic tires for proper inflation.
❑Inspect rear wheels for cracked, bent or broken spokes.
❑Ensure all spokes are uniformly tight.
❑Inspect axle assembly for proper tension by spinning caster. Caster should come to a gradual stop.
❑Inspect front caster for cracked, bent or broken spokes.
Inspect/Adjust Monthly
❑Check that the wheel locks do not interfere with tires when rolling.
❑Check that the wheel lock pivot points are free of wear and looseness.
❑Inspect seat and back for loose or broken hardware.
❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑Inspect back cane hand grips for wear/looseness/deterioration.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Check headtube locknuts for tightness.
Part No. 1114811 | 27 Lightweight, Standard and Heavy Duty Wheelchairs |
