SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Lightweight, Standard and Heavy Duty Wheelchairs 28 Part No. 1114811
Inspect/Adjust Periodically
❑Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑Inspect for loose/missing/broken hardware in all locations.
❑Inspect frame and crossbraces for loose or missing hardware.
❑Inspect for bent frame or crossbraces.
❑Check that wheel locks are easy to engage.
❑Inspect seat and backs for rips and sagging.
❑Check that there is no excessive side movement or binding in the rear wheels when
lifted and spun.
❑Inspect rear wheels for cracks and wear (hub and rim).
❑Inspect rear wheels for cracked, bent or broken spokes.
❑Inspect handrims for signs of rough edges or peeling.
❑Adjust front casters/forks bearing system if wheel wobbles noticeably or binds to a
stop.
❑Ensure wheel bearings are clean and free of moisture.
❑Inspect casters for cracks and wear (hub and rim).
❑Ensure that casters are free of debris.
❑Clean upholstery and armrests.
❑Check front riggings for rough/sharp edges and wear.
❑Check that all labels are present and legible. Replace if necessary.
TroubleshootingChair
Veers
Right/
Left
Chair 3
Wheels
Sluggish Turn or
Performance
Casters
Flutter
Squeaks
and
Rattles
Looseness
in
Chair
Solutions
XX X X
If pneumatic, check
tires for correct and
equal pressure
XXXXX
Check for loose stem
nuts and bolts.