Installation
Setting up the USB KVM Extender System is simply a matter of plugging in the cables. Refer to the diagram on the next page as you perform the following steps
1.Plug the cables from the local console devices (mouse, keyboard, monitor, microphone and speakers) into their ports on the rear panel of the Local Unit (CE800L). The connectors are color coded and marked with an icon for identification.
2.Connect the custom KVM cable provided to the KVM port on the CE800L’s front panel.
3.Connect the other end of the KVM cable into the appropriate ports on the computer system (or Console section of the KVM switch). The connectors are color coded and marked with icons for identification.
4.Connect one end of an ethernet cable to the Link port on the CE800L; then connect the other end to the Link port on the CE800R.
Note: Ethernet cable is not supplied with this package. It requires a separate purchase. The cable length can be up to 250 m (820’).
17
