5.4. Settings

5.4.1. Set Time & Site

Refer to STEP 8 in Section 3.2.

5.4.2. Set Beep

The Hand Controller allows a user to turn off the beep partially, or even go to the silent mode by press “MENU =>Settings =>Set Beep”,

Set Up Time and Site

Set Beep

Set Display

Set Guiding Rate

Set Tracking Rate

Set Parking Position

Meridian Treatment

Tracking Below Horizon

Select one of three available modes:

"Always On” – a beep will be heard on each button operation or mount movement;

On but Keyboard” – a beep will be heard only when the mount slewing to the object or there is a waning message; or

Always Off” – all the sound will be turned off, including SUN wrning message.

5.4.3. Set Display

Press “MENU =>Settings =>Set Display”,

Set Up Time and Site

Set Beep

Set Display

Set Guiding Rate

Set Tracking Rate

Set Parking Position

Meridian Treatment

Tracking Below Horizon

Use the arrow keys to adjust LCD display contrast, LCD backlight intensity and keypads backlight Intensity.

5.4.4. Set Guider Rate

This is an advanced function for autoguiding when a guiding camera is equipped either via a Guide Port or an ASCOM protocol. Before autoguiding, align the polar axis carefully. Select a proper guiding speed. The suppositional guiding speed can be selected from ±0.10X to ±0.80X. Follow the autoguiding software for detailed operation.

Figure 26. Guide port pinout

27

Page 27
Image 27
iOptron 7201, 7200 instruction manual Settings, Set Time & Site, Set Beep, Set Display, Set Guider Rate