Wireless Command Center
(optional accessory for selected models)
The Wireless Command Center lets you conveniently control Roomba’s functions. You can use it to turn Roomba on and off, schedule Roomba to clean, and steer Roomba around your room.
Troubleshooting
Light
Battery | ... | . . . | |
| |||
Indicator |
|
| |
SPOT | Roomba spirals approximately three feet in diameter and then spirals | ||
| back to where it started, intensely cleaning a local area. | ||
CLEAN | Roomba automatically calculates the room size and adjusts its | ||
| cleaning time appropriately. |
| |
. . . | Models | Roomba attempts to dock on the Home Base, if present. | |
|
|
| |
| Models | Roomba enters Max mode and cleans as long as the | |
| 600+ | battery allows. |
|
Pairing Roomba with the Wireless Command Center
Wireless Command Centers are set up to control only one Roomba. To pair a Wireless Command Center with a Roomba, you need four “AA” batteries (not included).
1Make sure Roomba’s battery is fully charged.
2Unplug the power supply or remove Roomba from its Home Base.
3Install three “AA” batteries into the Command Center.
4Hold down the left drive button while installing the fourth battery.
5Continue holding the button for 3 seconds or until the days of the week lights flash in a sequence from right to left (Saturday to Sunday).
6Install the battery door and place the Command Center on top of Roomba.
7Press and hold the DAY and MINUTE buttons on the Command Center for 2 seconds. The lights on the Command Center will flash to indicate the pairing has completed, and Roomba will make a
8When the Command Center is powered on from now on, the lights will flash in sequence from left to right until Roomba is under control.
18 iRobot Roomba 500 Series