Jabra BT2080 user manual Charge Your Headset

Instruction	Duration of press
Tap	Press briefly
Press	Approx: 1 second
Press and hold	Approx: 5 seconds

CHARGE YOUR HEADSET

Make sure that your headset is fully charged for two hours before you start using it.. Use the AC power supply to charge from a power socket.. When the battery indicator has a solid red light, your headset is charging.. When the headset is fully charged the battery indicator turns solid green for five minutes and is then turned off..

Use only the charger provided in the box - do not use chargers from any other devices as this may damage your headset..

Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period.. We therefore recommend that you recharge your device at least once a month..

TURNING YOUR HEADSET ON AND OFF

To turn on your headset please press the ON/OFF button for

2 seconds until both indicators flash on the Jabra StatusDisplay™

PAIRING IT WITH YOUR PHONE

Headsets are connected to phones using a procedure called ‘pairing’.. By following a few simple steps, a phone can be paired with a headset in a matter of minutes..

1 Put the headset in pairing mode

-When you turn on your Jabra BT2080 for the first time, the headset will automatically start up on pairing mode – i..e.. it is discoverable for your phone.. When the headset is in pairing mode the Bluetooth status indication on the StatusDisplay™ is flashing..

english

Jabra bt2080 4