Jabra BT2080 user manual HOW the Statusdisplay Works

Mute/un-mute

-To mute, press both volume up and down at the same time.. A low beep alert plays during a muted call..

-To un-mute, tap either of the volume buttons..

Call waiting and placing a call on hold*

-This lets you put a call on hold during a conversation and answer a waiting call..

-Press the answer/end button once to put the active call on hold and answer the waiting call..

-Press the answer/end button to switch between the two calls..

-Tap the answer/end button to end the active conversation..

english

HOW THE STATUSDISPLAY™ WORKS

Bluetooth	Indicates if your headset is connected to your
Indicator	phone
	- Solid light means headset is connected to your
	phone

-Flashing light means headset is in ‘pairing mode’ and ready to be connected to a new phone

Battery	Indicates battery level and if headset is
Indicator	turned ON
	- Green light indicates that the headset has more
	than 10 minutes of talk time remaining
	- Red light indicates that the headset has less
	than 10 minutes of talk time remaining

To save battery the Jabra StatusDisplay™ is turned off after 3 seconds.. Get an instant status from the Jabra StatusDisplay™ by a tap on any button on the headset when you are not on a call..

Jabra bt2080 7

* Phone dependent