www.jacksonmsc.com
AFTER MAINTENANCE ACTIONS
Tightening the bolts to secure the drive motor to the gear reducer.
30.Once the motor is securely fastened to the gear reducer, care- fully lift the assembly up and mount it on the fasteners. Be sure to use proper lifting techniques to prevent injury.
31.Once mounted, secure with the lockwashers and locknuts.
32.Reinstall the drive hub bearing and drive hub bolt, tightening down with the 7/8” combination wrench.
33.Reattach the bottom and top assembly covers.
Reconnect the incoming water (if disconnected) and turn on. Then restore power to the unit. Run the unit for at least 10 min- utes, running an empty rack through the machine to ensure that it is carried all of the way through. If you hear any grinding sounds while the motor is running, immediately shut off the unit and secure power and water. There is a serious problem that must be addressed. If any problems arise you can contact Jackson Technical Service.
SPECIAL NOTES
Work performed on Jackson dishmachines by unautho- rized or unqualified personnel may void the warranty. Before begin- ning this or any other maintenance evolution on a unit under war- ranty, you should contact a certified Jackson technician or Jackson Technical Service. You can find a list of qualified service agencies in the back of you unit’s installation manual.
SPECIAL PARTS
Gear Reducer:
Drive Motor Replacement Kit:
50 Hz:
60Hz/1 Ph:
60 Hz/3 Ph:
600 V/60 Hz/3 Ph:
Gear Reducer:
Drive Motor Replacement Kit:
50 Hz:
60Hz/1 Ph:
60Hz/3 Ph:
600V/60 Hz/3 Ph:
Gear Reducer:
Drive Motor Replacement Kit:
50 Hz:
60hz/1 Ph:
60Hz/3 Ph:
600V/60 Hz/3 Ph:
CONTACT INFORMATION
Jackson MSC Inc. provides technical support for all of the dishmachines detailed in this manual. We strongly recommend that you refer to this manual before making a call to our technical sup- port staff. Please have this manual with you when you call so that our staff can refer you, if necessary, to the proper page. Technical support is available from 8:00 a.m. to 5:00 p.m. (EST), Monday through Friday. Technical support is not available on holidays. Contact technical support toll free at
6 | Rack Conveyor Drive Motor and Gear Reducer Replacement Instructions | |
Revision A (07/05/2005) | ||
|