OPERATION
1.CONTROL VALVE. The Control Valve consists of three parts, the diverter (20a), flow control (20b), and
a. Diverter
The Diverter (20a) works as a function selection. Four icons on the diverter indicate the function selected. The four icons represent the following four
functions: Hand shower spray 
, Body jets 
, Wall mount spray 
, and Bath spout 
.
b. Flow Control
The Flow Control (4b) is located in the center of the Control Valve and is used to control the water flow volume. Increase the water flow by turning the handle to the left and decrease by turning to the right.
20a
20b
c. Thermo-Static Control
38
The | 20c |
the “H” and “C” letters, and red and blue colors representing Hot and Cold, respectively. Users can adjust the water temperature as they want by turning the control handle.
CAUTION: The “38° C” (100° F) mark on the control represents the safety temperature level. If a higher water temperature is needed, turn the handle left while pressing the red button.
CAUTION: Remember to return the handle to the “38°C” after use at the higher water temperature.
2.BRACKET. Use the wall mounted bracket (16) to hold the hand shower (15) on wall. Select "??" on the Diverter to activate the hand shower.
Troubleshooting
1.If the water flow rate is reduced or if there is no water flow while using a specific function, dismount the shower tower and verify the main water supply hoses (blue and red supply lines) or tubing are not bent or kinked.
2.During operation, if only cold or hot water is supplied but no combination, please check to see if the
Cleaning
Do not use sand paper, thinner or other corrosive cleaner. Normal
Proper installation of the shower tower and compliance with local codes is the responsibility of the installer. Jacuzzi Whirlpool Bath does not warrant connections of water supply fittings and piping, or fill systems. Nor is it responsible for damage to the shower tower which occurs during any installation procedure.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
USE INSTALLATION INSTRUCTIONS SUPPLIED WITH PRODUCT.
Jacuzzi Whirlpool Bath has obtained applicable code (standards) listings generally available on a national basis for products of this type. It is the responsibility of the installer/owner to determine specific local code compliance prior to installation of the product. Jacuzzi Whirlpool Bath makes no representation or warranty regarding, and will not be responsible for any code compliance.
Jacuzzi Whirlpool Bath
14525 Monte Vista Avenue
Chino, California 91710
Customer Service: Call:
Jacuzzi Whirlpool Bath: Shower Towers | Page 14 | FZ71000C • 10/07 |
