Luxury Whirlpool Bath
Decrease Speed
Press the
• | 1 light on = Low speed | Low | High |
• | 4 lights on = High speed |
|
|
Increase Speed
Press the (+) button to increase whirlpool speed. There are 2 whirlpool motor speeds, high and low. The indicator lights display the setting.
• | 1 light on = Low speed | Low | High |
• | 4 lights on = High speed |
|
|
Air Flow
Press the left air valve button to active the left air valves, press the right air valve button to activate the right air valves.
The amount of air induced into the whirlpool jets can be |
|
|
controlled from maximum to none. Use the (+) and | Left | Right |
buttons to increase or decrease air flow. |
|
|
The indicator lights immediately to the left and right of the air valve buttons indicate the amount of air induced.
Wave Mode
Press the wave button to cycle the air flow in the jets from maximum to no air flow.
If the wave mode does not initiate, ensure that you are in whirlpool operation mode (lights immediately to the
left of the jet button should be brightly lit).
Both right and left air valves are cycled simultaneously from a closed position (no air) to open (max air).
The indicator lights will display the flow as it cycles from minimum to maximum. To turn off wave mode, press the (wave) button.
English
Installation and Operation | www.jacuzzi.com | Page 17 |
